<html dir="ltr"><head></head><body style="text-align:left; direction:ltr;"><div>Cleaning out some old electronics if anyone wants/needs any of this.</div><div>This stuff needs to find a good home so it doesn't go into the electronic waste dump.</div><div><br></div><div>I live in Eagan, MN and would rather not ship.</div><div><br></div><div>Email me off-list and make an offer if you can give it a good home/make use of it.</div><div><br></div><div>SCSI</div><div>======</div><div>Anybody still run SCSI HDDs? - good spares if you need to support legacy equipment.</div><div><br></div><div>I have tested these HDDs by doing a low-level drive format (wrote zeros across device and then GPT formatted) each of these.</div><div><br></div><div>(1) Compaq, 7200 RPM, Ultra 2 wide, 68 pin BB009222B5, 9.1GB</div><div><br></div><div>(10) Seagate Cheetah, 10K RPM, Ultra 2 wide, 80 pin, ST318203LC ,18.2GB</div><div><br></div><div>(1) Quantum Atlas 10K, 10K RPM, 68 pin, TN18L462, 18GB</div><div><br></div><div>(1) Seagate Cheetah, 10K RPM, Ultra 160, 68 pin, ST336706LW, 36.7GB</div><div><br></div><div>(2) Quantum Atlas 10K ii, 10K RPM, Ultra wide, 68 pin, TY73L011, 73.4GB</div><div><br></div><div>I also have</div><div>(2) 80-pin to 68-pin SCSI Ultra 320 compliant adapters (80 pin on one side, 68 pin + 4-pin power on the other)</div><div><br></div><div><br></div><div>4U 16-bay SATA servers</div><div>=====================</div><div>I have two 4U rack mount servers that I haven't powered up in years, but they ran fine when I shut them down.</div><div>I can secure erase the HDDs if you want them included, but that'll take a few days.</div><div>HDDs were all Seagate Barracudas, but I see I replaced a failed one with a Western Digital Caviar Black.</div><div>CDROM or CD/DVD and Gb ethernet in each</div><div><br></div><div>#1 16 bay SATA connected to two 3Ware 9550SX RAID controllers (I ran 2 8x750GB HDD RAID5 arrays)</div><div> Boot drive: separate SATA (RAID or HDD) connected to mainboard</div><div> mainboard: Supermicro X6DHE-XB</div><div> case: Chenbro RM414</div><div> CPU: 2x 3.0GHz Xeon</div><div> RAM: 16GB PC2100 DDR 266 ECC Reg</div><div><br></div><div>#2 16 bay SATA connected to two 3Ware 9550SX RAID controllers (I ran 2 8x500GB HDD RAID5 arrays)</div><div> Boot drive: separate SATA (RAID or HDD) connected to mainboard</div><div> mainboard: Supermicro X6DHE-XB</div><div> case: Chenbro RM414</div><div> CPU: 2x 3.4GHz Xeon</div><div> RAM: 4GB PC2100 DDR 266 ECC Reg</div><div><br></div><div><br></div><div>KVM switch</div><div>==============</div><div>I also have an Altusen KN9116 remote KVM controller with cables that I used in my home 42U rack</div><div><a href="https://www.aten.com/global/en/products/kvm/kvm-over-ip-switches/kn9116/">https://www.aten.com/global/en/products/kvm/kvm-over-ip-switches/kn9116/</a></div><div><br></div><div><br></div><div>Embedded ATA SSDs</div><div>====================</div><div>(2) Zheino Industrial B 8GB SLC SSD</div><div>(2) Zheino Industrial B 16GB SLC SSD</div><div><br></div><div><br></div><div>Tabloid Printer</div><div>================</div><div>Xerox Phaser 7700gx with optional 3 drawer base set up for 2 letter, 1 legal, 1 tabloid</div><div>Does not print well - prints illegible greyish smudge.</div><div>It has lots of toner remaining, plus NIB high-capacity Black, Yellow, and Magenta toner cartridges.</div><div>I also have NIB waste toner cartridge and NIB belt cleaner assembly.</div><div><br></div></body></html>