On 2015/06/06 9:35 PM, Andrew Lunn wrote: > > > I'm not sure we are talking about the same things here. What do yo > mean by information? Do you mean u-boot environment variables? You > should not need those to boot u-boot. > > Also, kwboot does not need u-boot. It uses what is in the Kirkwood > ROM, inside the chip. There is no way you can erase that. So if you > have erase u-boot, that will not stop kwboot working. > > Andrew > _______________________________________________ > TCLUG Mailing List - Minneapolis/St. Paul, Minnesota > tclug-list at mn-linux.org > http://mailman.mn-linux.org/mailman/listinfo/tclug-list The pogoplug that I have is dead. The serial port has no output and the led doesn't flash. An article on Your warranty is void.com talks about using the jtag port to load a new u-boot and kernel when the device stops responding to the serial port. Joseph --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus