Florin Iucha wrote: > On Fri, Aug 31, 2001 at 07:56:50AM -0500, Shawn Fertch wrote: > > On Thursday 30 August 2001 11:32, you wrote: > > > I'm trying to get my internal ISA modem to work. It's a US Robotics 56k > > > modem. The it's assigned an IRQ of 5, Com 4 under Win2k. I recently > > > reloaded my box and assigned the modem to ttyS3 under the Slackware 8 > > > setup. Is there something more I need to do to get it to work? I have the > > > ISA PnP module loaded as well. > > > > > > Would this be in the modem how-to or in the ppp how-to also? > > > > A little more info on this: > > > > When I initially did setserial -bg /dev/ttyS? it cam back showing that I > > only had one serial port of ttyS2 with an irq of 4. > > > > So then I tried to do setserial -irq 5 -uart 16550A /dev/ttyS3 and it added > > it in. I'm no further along now than I was initially. /dev/ttyS3 is linked > > to /dev/modem as well. > > > > I have both of my external serial port connections disabled in the bios, as > > well as non PnP OS selected. > > > > The modem has jumpers on it, but I've not touched them from the factory > > settings. It's an older ISA 56k modem, which I think might be an 8-bit card. > > It only goes into the slot closest to the back of the case, not both like > > some of the other ISA cards. Might be a shared slot. Do you have a PCI card in the next slot? If so that could be the problem RS