It looks like you have two cards -- are they the same kind of card? If so, it is possible that the BIOS switched them around so that what was eth0 is now eth1 and vice versa. Might that be the case? Eric On Sun, Aug 12, 2001 at 05:34:43PM -0500, Miller, John wrote: > I wrote earlier this week about my mb dying. After further trials, it > still lives. I took the system apart so I could get to the connector > better and plugged it in and it worked. The ps died. > > Now I have my system reassembled and the NIC that I use to connect to > the internet seems not to be working. Drivers for both cards are > loaded. /proc/pci lists them both When I plug the cable in, the link > light comes on on the back of the card but does not light up the hub. I > have swap the the cord on the hub, nothing. When I bring eth0 up with > ifconfig eth0 up, I get all the information. > > The card is a netgear FA311. It has served me well. > > Anyone have any ideas, > > TIA > > John Miller > _______________________________________________ > tclug-list mailing list > tclug-list at mn-linux.org > https://mailman.mn-linux.org/mailman/listinfo/tclug-list >